| Switch
Data |
SPST
Hermetically Sealed
Reed Switch |
Max Switching
Voltage
DC (V) 200
AC (V) 150 |
Contact Rating
DC (W) 50
AC (VA) 70 |
Max. Switching
Current
DC (A) 1.0
AC (A) 0.7 |
|
| Leads |
SPST
Leads 18 in. min. from body 22 AWG, TFE
insulation. |
 |
|
Above values for resistive
loads only. For inductive loads, surge current and rush
current -- contact protection is required; consult your
local representative. |
Specifications
|
| Unit |
Max. Working Pressure
PSIG (BARG) |
Wetted
Parts |
Seals |
| 316ss |
6000 (413.4) |
316ss, Epoxy |
Viton® |
Fluid Ports: Inlet/Outlet Ports
- See Calibration Ranges
Temperature Operating Range: 32°
to 220° F (0° to 104° C).
Installation: The 250 series may
be mounted in any position. 500 and 750 series can be mounted
in any position except with the outlet port down. We suggest the
unit be calibrated in the attitude in which it will be installed.
An actuation point two to three times the normal flow rate should
be chosen to avoid the valve actuating from initial pressurization
of the system and normal surges. If flow is kept constant, an
actuation point 10% above the normal rate may be used.
| MODEL |
WEIGHT
Lbs (Grams) |
DIMENSIONS
Inches (mm) |
| |
|
A |
B |
C |
D |
E |
| EFV250 |
1.47 (0.667) |
3.75 (149) |
1.50 (38) |
1.00 (25) |
1.00 (25) |
1.00 (25) |
| EFV500 |
2.625 (1.190) |
4.25 (108) |
2.00 (51) |
1.25 (32) |
1.25 (32) |
1.37 (35) |
| EFV750 |
3.44 (1.560) |
5.25 (133) |
2.25 (57) |
1.25 (32) |
1.625 (41) |
1.625 (41) |
How to Order
HPEFV
Model |
250
Size |
S
Material |
PSO
Positive Shut-Off |
ES
Electric Switch |
OPTIONS
Any of the following options may be added: |
|
250
500
750 |
Other material available upon request. |
Blank for Controlled
Bleed Model |
Normally Open* |
| O2 |
Oxygen Cleaned |
| HT |
High Temperature Unit
340° F (171° C) |
| KZ |
Kalrez® Seals |
| EPR |
EPR Seals |
| Z |
Special Custom Option |
| FP |
Factory Presetting
(State trip point,
medium, and line pressure)
Welded Fittings * |
|
* Consult Factory
Note:
All dimensions and specifications are subject to change for quality
improvement. Not responsible for typing errors.
Kalrez® and Viton® are registered trademarks
of DuPont Dow Elastomers
Teflon® is a registered trademark of E. I. du Pont de Nemours and Company.
|
