| Switch
Data |
SPST
Hermetically Sealed
Reed Switch |
Max
Switching Voltage
DC (V) 200
AC (V) 150 |
Contact
Rating
DC (W) 50
AC (VA) 70 |
Max.
Switching Current
DC (A) 1.0
AC (A) 0.7 |
|
| Leads |
SPST
Leads 18 in. min. from body
22 AWG, TFE insulation. |
 |
|
Above
values for resistive loads only. For inductive
loads, surge current and rush current -- contact
protection is required; consult your local
representative. |
| Unit |
Max. Working Pressure
PSIG (BARG) |
Wetted Parts |
Seals |
Balancing Valves
Packing |
| Brass |
1500 (103.42) |
Brass, Epoxy, Delrin** |
Viton® |
Teflon® |
| 316ss |
3000 (206.84) |
316ss, Epoxy |
Viton® |
Teflon® |
|
|
** Brass Piston in 125 Unit |
|
|
Fluid Ports:
Inlet/Outlet Ports - See Calibration Ranges
Temperature
Operating Range: 32° to 220° F (0° to 104°
C).
Installation:
The 125, 250 and 375 series can be mounted
in any position. The 500 and 750 series can be mounted
in any position except with the outlet port down. We
suggest the unit be calibrated in the attitude in which
it will be installed. An actuation point approximately
3 or 4 times normal flow rate should be chosen to avoid
the valve actuating from initial pressurization of the
system and normal surges. If flow is kept constant,
an actuation point 10% above the normal rate may be
used.
| MODEL |
WEIGHT
Lbs (Grams) |
DIMENSIONS
Inches (mm) |
| |
|
A |
B |
C |
D |
E |
| EFV125 |
1.50
(0.68) |
2.72
(69) |
1.50
(38) |
0.75
(19) |
1.12(28) |
1.62
(41) |
| EFV250
|
4.62
(2.095) |
3.71
(95) |
2.00
(50) |
1.50
(38) |
1.94
(49) |
2.75
(70) |
| EFV375 |
4.62
(2.095) |
3.71
(95) |
2.00
(50) |
1.50
(38) |
1.94
(49) |
2.75
(70) |
| EFV500 |
4.75
(2.152) |
4.46
(114) |
2.00
(50) |
1.75
(45) |
1.94
(49) |
2.75
(70) |
| EFV750 |
7.06
(3.204) |
5.34
(136) |
2.00
(50) |
2.13
(54) |
2.13
(54) |
3.00
(77) |
How
to Order
EFV
Model |
125
Size |
B
Material |
MRS |
ES
Electric Switch Normally Open |
OPTIONS
Any of the following options may be added: |
|
125
250
375
500
750 |
|
Manual
Reset Model |
(ES
not available on 125 model) The
ES option comes with
a 1/2" FNPT
conduit and the
FP option. |
| O2 |
Oxygen
Cleaned |
| HT |
High
Temperature Unit 340° F (171° C) |
| KZ |
Kalrez®
Seals |
| EPR |
EPR
Seals |
| Z |
Special
Custom |
| FP |
Factory
Presetting (State trip point, medium,
and line pressure)
Welded Fittings * |
|
* Consult
Factory
Note:
All dimensions and specifications are subject to change
for quality improvement. Not responsible for typing
errors.
Viton®
is a registered trademark of DuPont Dow Elastomers
Teflon® is a registered trademark of DuPont
|
