| Switch
Data |
SPST
Hermetically Sealed
Reed Switch |
SPDT
Hermetically Sealed
Reed Switch |
Max
Switching Voltage
DC (V) 200
AC (V) 150 |
Max
Switching Voltage
DC (V) 175
AC (V) 120 |
Contact
Rating
DC (W) 50
AC (VA) 70 |
Contact
Rating
DC (W) 5
AC (VA) 5 |
Max.
Switching Current
DC (A) 1.0
AC (A) 0.7 |
Max.
Switching Current
DC (A) .25
AC (A) .25 |
|
| Leads |
SPST
Leads 18 in. min. from body 22 AWG, TFE insulation. |
 |
SPDT
(optional)
Leads 18 in. min. from body 24 AWG, TFE insulation.
- green - N.C.
- blue - N.O.
- white - Common
|
|
Above
values for resistive loads only. For inductive loads,
surge current and rush current -- contact protection
is required; consult your local representative. SPDT
is UL recognized. |
Specifications
|
| Unit |
Weight
Lbs (Kg.) |
Working
Pressure
PSIG (BARG) |
Wetted
Parts |
Seals |
| 316ss |
5 (2.27) |
6000 (413.4) |
316ss,
Epoxy |
Viton® |
Fluid Ports:
Inlet/Outlet 1/2" FNPT
Electrical Conduit:
1/2" FNPT
Temperature Operating
Range: 32° to 220° F (0° to 104° C). For other temperature
ranges, consult factory.
Installation:
Mount vertically (leads on the side) with horizontal piping.
A 100 micron filter is recommended.
How
to Order
500
Model |
316
Body Material |
BPHP
Bypass High
Pressure Design |
W
Cover Type |
SPDT
Switch Option |
OPTIONS
Any of the following options may be added: |
|
|
|
| W |
NEMA
IV
Waterproof |
| X |
NEMA
VII
Explosion Proof |
|
| N.O. |
Single
Pole
Single Throw
Normally Open |
| SPDT |
Single
Pole
Double Throw |
|
| TFE |
Teflon®
Encapsulated Piston ** |
| O2 |
Oxygen Cleaned |
| KZ |
Kalrez®
Seals |
| EPR |
EPR Seals |
| BN |
Buna N Seals |
| S |
Special Custom
Welded Fittings |
|
* Consult Factory
Note:
All dimensions and specifications are subject to change for
quality improvement. Not responsible for typing errors.
Kalrez® and Viton® are registered
trademarks of DuPont Dow Elastomers
Teflon® is a registered trademark of DuPont.
