Adjustable Flow Monitor
FAV Series Specifications


For monitoring higher flows of gases and liquids.
 
Fluid Ports: See Calibration Table
Temperature Operating Range: 32o  to 220o F
Oo to 104o C
For other temperature ranges: Consult factory
Installation: Mount (lead up) with inlet port on the side horizontally and the
outlet down vertically. Other attitudes change the adjustable range of the
unit. A 100-micron filter is recommended
Switch Data
SPST
Hermetically Sealed
Reed Switch
SPDT
Hermetically Sealed
Reed Switch
Max Switching Voltage
DC (V) 200
AC (V) 150
Max Switching Voltage
DC (V) 175
AC (V) 120
Contact Rating
DC (W) 50
AC (VA) 70
Contact Rating
DC (W) 5
AC (VA) 5
Max. Switching Current
DC (A) 1.0
AC (A) 0.7
Max. Switching Current
DC (A) .25
AC (A) .25
Leads
SPST
Leads 18 in. min. from body 22 E 19, TFE insulation.
SPDT (optional)
Leads 18 in. min. from body 24 E 19, TFE insulation.
  • green - N.C.
  • blue - N.O.
  • white - Common

Above values for resistive loads only. For inductive loads, surge current and rush current -- contact protection is required; consult your local representative. SPDT is UL recognized.

Specifications
Unit Weight
Lbs (Grams)
Working Pressure
PSIG (BARG)
Wetted Parts Seals
FAV-250-ESB 1.4 (635) 1500 (103.42) Brass, Epoxy 316ss Viton®
FAV-250-ESS 1.4 (635) 3000 (206.84) 316ss, Epoxy Viton®
FAV-375-ESB 1.4 (635) 1500 (103.42) Brass, Epoxy 316ss Viton®
FAV-375-ESS 1.4 (635) 3000 (206.84) 316ss, Epoxy Viton®
FAV-500-ESB 1.4 (635) 1500 (103.42) Brass, Epoxy 316ss Viton®
FAV-500-ESS 1.4 (635) 3000 (206.84) 316ss, Epoxy Viton®
FAV-750-ESB 1.7 (771) 1500 (103.42) Brass, Epoxy 316ss Viton®
FAV-750-ESS 1.7 (771) 3000 (206.84) 316ss, Epoxy Viton®

Dimensions Inches (mm)

SIZE A B C D E
FAV-250 3.25 (82.6) 3.25 (82.6) 1.00 (25.4) 1.00 (25.4) 1.25 (31.8)
FAV-375 3.25 (82.6) 3.25 (82.6) 1.00 (25.4) 1.00 (25.4) 1.25 (31.8)
FAV-500 3.25 (82.6) 3.25 (82.6) 1.00 (25.4) 1.00 (25.4) 1.25 (31.8)
FAV-750 3.97 (100.8) 4.28 (108.7) 1.25 (31.8) 1.63 (41.4) 1.63 (41.4)

 

How to Order

FAV
Model
250
Size
ES
Electric
Switch
B
Material
G
Type of Service
SPDT
Switch Options
OPTIONS
Any of the following options may be added:
250

375

500

750

B Brass
S 316 ss
W Water
G Gas
N.C. Normally Closed Single Pole Single Throw. (Normally Closed not available on conduit unit.)
N.O. Normally Open
SPDT Single Pole Double Throw
HT High Temperature Option 340° F (171 ° C)
KZ Kalrez® Seals
EPR EPR Seals
BN Buna N Seals
S Special Custom
Option

* Consult Factory

Note:
All dimensions and specifications are subject to change for quality improvement. Not responsible for typing errors.

Kalrez® and Viton® are registered trademarks of DuPont Dow Elastomers
Teflon® is a registered trademark of DuPont.





 

Home - About - Products - Distributors - Contact

© CTE Chem Tec -
Designed and Hosted by ABC Web Service