|
|
Adjustable Flow Monitor
500 Bypass Series Specifications
For monitoring higher flows of corrosive and
non-corrosive gases and liquids |
 |
| Switch
Data |
SPST
Hermetically Sealed
Reed Switch |
SPDT
Hermetically Sealed
Reed Switch |
Max Switching Voltage
DC (V) 200
AC (V) 150 |
Max Switching Voltage
DC (V) 175
AC (V) 120 |
Contact Rating
DC (W) 50
AC (VA) 70 |
Contact Rating
DC (W) 5
AC (VA) 5 |
Max. Switching Current
DC (A) 1.0
AC (A) 0.7 |
Max. Switching Current
DC (A) .25
AC (A) .25 |
|
| Leads |
SPST
Leads 18 in. min. from body 22 AWG, TFE insulation. |
 |
SPDT (optional)
Leads 18 in. min. from body 24 AWG, TFE insulation.
- green - N.C.
- blue - N.O.
- white - Common
|
|
Above values for resistive
loads only. For inductive loads, surge current and rush current contact protection is
required; consult your local representative. SPDT is UL recognized. |
Specifications
|
| Unit |
Weight
Lbs. (Kg.) |
Working
Pressure
PSIG (BARG) |
Wetted
Parts |
Seals |
| Teflon® |
1.5
(0.68) |
80
(5.51) |
Teflon® |
Teflon® |
| Brass |
4.0
(1.81) |
1500
(103.42) |
Brass, Epoxy |
Viton® |
| 316ss |
|
|
316ss, Epoxy |
Viton® |
Fluid Ports:
Inlet/Outlet 1/2" FNPT
Electrical Conduit
Optional: 1/4" FNPT
Temperature Operating
Range: 32° to 220° F (0° to 104°
C). For other temperature ranges, consult factory.
Installation:
Mount V
4.0 (1.81)3000
(206.84) |
ertically (leads up) with horizontal piping.
A 100 micron filter is recommended.
How to Order
500
Model |
316
Body Material |
BP
Bypass Design |
W
Cover Type |
SPDT
Switch Options |
OPTIONS
Any of the following options may be added: |
|
| T |
Teflon®** |
| B |
Brass |
| 316 |
316ss |
|
BP
Bypass
BPHF
Bypass
High
Flow |
Explosion
Proof
|
| N.O. |
Single Pole Single Throw Normally Open |
| SPDT |
Single Pole Double Throw |
|
| TFE |
Teflon® Encapsulated Piston ** |
| O2 |
Oxygen Cleaned |
| HT |
High Temperature Option 340° (171° C) |
| KZ |
Kalrez® Seals |
| EPR |
EPR Seals |
| S |
Special Custom Option
Welded Fittings* |
|
* Consult Factory
** Standard with Teflon® unit
Note:
All dimensions and specifications are subject to change for quality improvement. Not
responsible for typing errors.
Kalrez® and Viton® are registered trademarks of
DuPont Dow Elastomers
Teflon® is a registered trademark of DuPont. |
Home
- About - Products
- Distributors - Contact
|
