ChemTec’s FS Series is one of two non-adjustable flow monitors we offer. The FS’s original design is built to handle liquid with flow rates as low as 0.15 GPMs and ranging as high as 8.5 GPMs.
The FS offers the same ease of use and low maintenance of ChemTec’s versatile LPH Series. And, like all ChemTec products, the FS Series can be customized to meet your customer’s needs. Below, a few examples of standard and custom FS’s.
Standard unit shown in 360 Brass; fixed actuation point; non-adjustable. Close on/off differential, no seals, in-line porting.
Custom FS in 316 SS with 1/2 FNPT inlet, 1/2 MNPT outlet. Applications: Thermal heater, packaging machines, spray paint booth.
Custom FS in PVC with 1/2″ FNPT ports, 1/2″ FNPT conduit, high voltage switch. Applications: animal feed-water dispensing.
Custom FS in PVC, 1/2 MNPT inlet and outlet, Molex pin and plug, heat shrink. Applications: aser cooling for light lasers at Disney.
Custom FS Series in brass hex with leads removed from outlet face. With a spring, unit can be installed in any direction.
Custom FS with removable conduit/switch assembly allows easy welding without damaging the switch. Applications: commercial AC systems, Freon circulation loop.
Custom FS in Delrin 150 white with 1/2″ male tape pipe and 1/4″ crimp male disconnect terminals, wrench flats. Applications: for water; mixing of chemicals.
Custom FS in PVC; mounting holes, hose barb and tube fittings, Amp pin and plug. Applications: cooling circuit with glycol water mix.
See the FS Series Specifications page for flow rates, port sizes and options.
Some current applications for the FS Series include but are not limited to pharmaceutical processing equipment, thermal process controllers, hands-free emergency eye wash stations, laser cooling systems, chemical mixing systems and heat pumps.
For more information on the FS Series, applications, specifications, design and/or product customization contact Rajen.